Only charge the vacuum using the original power adapter provided by Airbot. Do not attempt to use third-party chargers.
Press the red trigger button once to start the vacuum. The device features a continuous-run trigger; you do not need to hold the button down while cleaning.
Understanding the core metrics of your Airbot Hypersonic Pro helps you select the right settings for different floor types and maximize battery efficiency. What is in the Box?
Airbot Hypersonic Pro Manual: Complete Guide to Using & Maintaining Your Vacuum airbot hypersonic pro manual
Use a coin to unlock the brush roll on the side of the head. Remove the brush roll. Cut away tangled hair or threads with scissors. Reinsert the brush roll and lock it. 5. Troubleshooting Guide Potential Cause Battery is dead or low. Charge the battery. Weak suction power Dustbin full, filters dirty, or blockage in pipe. Empty bin, clean filters, check pipe for clogs. Brush roll stopped spinning Tangled hair/debris. Clean the brush roll. LED light flashing Battery issue or motor overheating. Let it cool, check for clogs.
Based on the "Customer Support" section of the manual:
Refer to pages 4-5 of the printed Airbot Hypersonic Pro manual. Only charge the vacuum using the original power
The AirBot Hypersonic Pro is a high-performance consumer drone designed for advanced hobbyists and prosumers. This article provides a comprehensive, structured manual-style guide covering specifications, setup, operation, maintenance, troubleshooting, safety, and advanced tips to help you get the most from your Hypersonic Pro.
Connect the metal extension pipe to the main unit until a click is heard.
The vacuum's dust sensor detects hidden dust, hair, and debris, automatically adjusting suction power. The device features a continuous-run trigger; you do
Up to 45 minutes in Energy Saving/Eco mode; ~12–18 minutes in Turbo/Boost mode. Charge Time: Approximately 4 hours. ~1.1 kg (handheld unit). Dust Cup Capacity: 0.8 liters. 2. Getting Started & Controls The device uses a Smart LED Touch Screen to manage cleaning modes and monitor performance. Powering On: Press the power button on the handle. Mode Selection: Use the touch interface to toggle between Auto Mode:
The vacuum has a smart Auto Mode and manual speed controls (3-speed setting).
The board is designed with a 30.5x30.5mm mounting pattern, fitting standard 5-inch and larger frames. However, the magic is in the connector placement.
By clicking “OK” (or any link) you agree to our use of cookies (including partner cookies) and other technologies to personalize your experience on our website. Privacy Policy.