Zte F689 Bridge Mode Exclusive -

: Before bridging, ensure you have your PPPoE username and password. Once the ZTE is in bridge mode, your new router

Note: Before making changes, take a screenshot of your current WAN settings, especially the , as you will need this for your new router.

Modifying WAN connections can disconnect your internet if done incorrectly. Always save a backup first. Navigate to or Administration in the top menu. Look for System Management > Configuration File . zte f689 bridge mode exclusive

To prevent wireless interference and IP conflicts, turn off the ZTE F689's built-in broadcasting systems. Go to > WLAN > WLAN Basic .

Ensure the matches the original settings (usually set to Tag with your specific VLAN ID entered). Click Modify , Save , or Apply at the bottom of the page. Step 4: Bind the LAN Port : Before bridging, ensure you have your PPPoE

Connect your computer directly to of the ZTE F689 using an Ethernet cable.

Change the to IP or PPPoE depending on your provider, but set the Connection Mode strictly to Bridge . Always save a backup first

Setting up a high-performance home or office network often requires moving past standard ISP configurations. The ZTE F689 is a robust Gigabit Passive Optical Network (GPON) terminal used by numerous internet service providers globally. While it functions well as an all-in-one gateway, its routing capabilities, Wi-Fi range, and advanced traffic management can limit heavy users, gamers, and tech enthusiasts.

Connect a computer directly to one of the LAN ports on the ZTE F689 using an Ethernet cable. Open a web browser and enter the default gateway IP address. Typically, this is 192.168.1.1 or 192.168.0.1 .

Save and apply settings. Your new router will establish the connection, and your entire network will now run smoothly without double NAT restrictions. Troubleshooting Common Issues

Because DHCP is turned off, your computer will no longer get an IP address automatically from the ZTE device.