Look at the ground mark and adjust the tripod legs until the red laser dot rests precisely on the center of the mark.
: Dual-axis liquid compensator for automatic error correction Instrument Setup and Leveling
If the instrument gets wet in the rain, do not store it in its closed case overnight. Leave the case open and allow the total station to air dry naturally at room temperature to prevent internal condensation.
Complete Guide and User Manual for the Leica TCR805 Total Station leica tcr805 total station user manual
Repeat until the tilt values on both axes read as close to 0° 00' 00" as possible (ideally under 5 arc-seconds). 4. Job Management and Configuration The Leica TCR805 organizes all measurements inside "Jobs". Creating a New Job
for water and dust protection, ensuring it can operate in diverse environmental conditions. 2. Instrument Setup and Leveling According to the Leica TCR805 Manual (Scribd) , proper setup is the foundation of accurate measurement: Centering and Leveling:
The TCR805 is designed for versatility in engineering and tacheometry surveys. Look at the ground mark and adjust the
Connect the cable to the 5-pin lemo port at the base of the Leica TCR805 and the other end to your PC.
: Supports numeric and alphanumeric entry for point naming and code input. Integrated Software Programs :
Warning: Ensure you select the correct prism constant (e.g., 0.0mm for Leica standard prisms, or -30.0mm for third-party prisms). Failing to do so will result in systematic distance errors on every shot. Atmospheric Corrections Complete Guide and User Manual for the Leica
Look through the optical plummet (or activate the laser plummet if equipped) and shift the tripod legs until the crosshairs align with the ground mark.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.