Save your radio configuration as a file on your hard drive. If your radio is reset or damaged, you can restore your programming in seconds.
You can now navigate the software tabs to customize your radio:
Open Device Manager on your PC. Find your USB serial cable. Note the COM port number (e.g., COM5). Open the CS-2200 software. Go to Settings > Communications Port and change it to match (e.g., COM5). Set speed to 9600 baud .
: Assign an alphanumeric label (up to 6 characters) to easily identify the repeater or club frequency on the radio screen. Digital Capabilities (UT-118 Option) CS-2200 Icom IC-2200H Programming Software
Click the (or Clone <- Radio ) icon in the CS-2200 toolbar. Wait for the progress bar to complete. Writing to the Radio
This is usually caused by incorrect COM port settings or driver issues. Ensure you select the correct COM port in the software settings, which you can find in the Windows Device Manager under "Ports (COM & LPT)".
The official Icom USB-to-3.5mm stereo plug programming cable. Save your radio configuration as a file on your hard drive
Configures built-in CTCSS and DTCS tones for repeater access and squelch.
: Install the programming software of your choice. If you are using a third-party cable, you may also need to install its specific drivers.
Setting up PL tones, repeater shifts, scan edges, and repeater bank scanning is much more intuitive in the software. Find your USB serial cable
The CS-2200 software is natively built for the Windows ecosystem. Ensure your USB drivers are fully updated before initiating the cloning process. Step-by-Step Installation and Setup
Excellent interface; includes built-in links to repeater directories; supports both Windows and Mac. CHIRP (Free) Budget Conscious Open-source and free; supports many radios including the