Xnx Universal Transmitter Quick Start | Guide

The physical placement of your Xnx transmitter directly impacts its performance.

Confirms a selection, enters a sub-menu, or accepts a changed value.

Monitor the real-time values on the display. Once the readings level off and remain stable, swipe to save the span setting.

The XNX utilizes a non-intrusive magnetic user interface. Pass the magnetic wand over the glass window to navigate menus without opening the explosion-proof enclosure.

Ensure the transmitter is powered off before connecting or swapping a sensor. Xnx Universal Transmitter Quick Start Guide

Attach the internal or external earth ground wire to the dedicated grounding screw to reduce electromagnetic interference. Optional Relays and Modbus Connections

Before leaving the site, complete these final validation steps:

: Connect the internal earth ground stud to a local ground.

If an issue occurs during setup, the display will show a fault code accompanied by a yellow LED. The physical placement of your Xnx transmitter directly

Whether you are integrating with a or using the local relays .

The screen will prompt for a security passcode. The default passcode is .

In the rapidly evolving world of industrial automation and gas detection, the ability to adapt is non-negotiable. Enter the —a versatile, modular device designed to bridge the gap between various gas sensors and your central control system. Whether you are an instrument technician, a plant manager, or an integrator, getting this device online quickly and correctly is critical for safety and operational uptime.

Press to save, turn off the gas, and remove the adapter. Fault Codes and Troubleshooting Once the readings level off and remain stable,

Diagrams for terminal blocks, DIP switch settings, and LED status indicators are well-labeled and easy to follow. The use of color coding (e.g., red for power, black for ground) matches common field wiring practices.

If you need help troubleshooting specific errors during your setup, please let me know:

If your model includes the optional relay module (three Form C SPDT relays for Alarm 1, Alarm 2, and Fault) or the Modbus/Foundation Fieldbus options, connect these lines to the secondary terminal strip located on the internal interface board. 4. Front Panel Interface and User Navigation

Connect a dedicated ground wire to either the internal or external earth ground lug using a minimum 12 AWG (4 mm²) wire to ensure proper electromagnetic compatibility (EMC) and safety shielding. 2. Power and 4-20mA Output (Standard Block)