Jis Z 1707 Instant

Yes, under Type 3 (special quality). Additional surface resistivity requirements (typically ≤ 1×10¹¹ Ω/sq) must be agreed separately.

For rolls:

The standard enforces uniform testing methodologies to ensure films resist processing stress, survive distribution networks, and maintain a sterile seal.

When writing a procurement specification for food packaging film, a typical clause might read: “The plastic film shall comply with JIS Z 1707:2019, General rules of plastic films for food packaging. The puncture strength, measured according to Section 7.4 (using a 1.0 mm diameter needle with 0.5 mm radius tip at 50 mm/min), shall be ≥ 3.0 N, and the heat seal strength, measured according to Section 7.5, shall be ≥ 10 N/15 mm.” jis z 1707

Established by the Japanese Standards Association (JSA), JIS Z 1707 has undergone multiple revisions to adapt to advancements in polymer technology. The most recent major revisions occurred in the late 1990s and early 2000s, aligning with global trends toward thinner, stronger films with better environmental stability.

Tensile properties determine how a film behaves under pulling forces — a critical aspect for processes such as form‑fill‑seal (FFS), handling, and end‑use. While JIS Z 1707 references JIS K 7127 for the detailed tensile testing methodology, the standard itself includes specifications for sample preparation, test speed, and acceptance criteria.

Draft Essay: Understanding the JIS Z 1707 Standard The JIS Z 1707 standard, established by the Japanese Industrial Standards (JIS) committee, serves as a critical benchmark for the performance and quality of plastic films used in food packaging. As global supply chains become more complex, adherence to such standards ensures that packaging materials effectively protect food products from contamination, spoilage, and physical damage. Yes, under Type 3 (special quality)

: Regulates the rate of moisture movement. Restricting this parameter protects dehydrated foods from clumping and fresh produce from drying out.

Industries that mandate often do so to ensure consistent machinability on high-speed packaging lines.

The "best feature" of JIS Z 1707 is its balance between . It provides a universal language for the industry: When writing a procurement specification for food packaging

Even outside of Japan, many multinational corporations use JIS Z 1707 as a voluntary internal benchmark due to its comprehensive and stringent nature compared to standard international metrics.

If you are exploring new, sustainable materials, I can share studies showing how biodegradable alternatives are being tested against JIS Z 1707 standards. Share public link